|Product SKU||Isopon P40|
|Size (L x W x H)||12 cm x 12 cm x 8 cm|
Malaysia Not Applicable
Isopon P40 Kit is easy to apply. it is extremely strong, lightweight and weatherproof and will bond fast to metal and glass fibre.
Product details of Isopon P40 Body Filler For Holes
ISOPON P.40 Body Filler for Holes is the ideal choice for repairing and priming rust holes up to 75mm wide in most types of metal ready for painting.
-Strong 2K polyester bridging compound
-Ideal for bridging holes and is water resistant when cured.
-Supplied with suitable hardener and usage instructions.
-Glass fibre compound for bridging holes and rust
-Sets in 20 minutes
-Bonds to metal and glass
-Ship form Malaysia
-100% new condition
- Marine: Fibreglass and plywood boats, surfboards, water skis and surfcraft
- Automotive: Rusted panels, dents and holes in vehicles, caravans and trailers Uses include binding split or damaged booms, spars, spinnaker poles and oars and repairs to transom edges
- Home: Metal roofs, guttering and downpipes, fibro sheeting, fibreglass furniture, water tanks etc Repairs performed with this kit are waterproof, weather resistant, rotproof and unaffected by marine growth, borers and worms.
- Polyester Glass Fibre Filler
- Surface preparation and instructions for use
ISOPON P40 polyester filler can be used on the following surfaces:-
- Bare steel – degrease and abrade with P80 paper, remove all traces of rust.
- Original paint surfaces (with the exception of thermoplastic acrylics) - degrease and abrade back to bare metal with P180 paper.
- Mixing ratio 100 parts by weight ISOPON P40 polyester filler
- 3-4 parts by weight ISOPON hardener for polyester filler. The exact mixing ratio is not critical, although over or under catalyzation may affect the gel time. Excess hardener will not significantly speed up the gel time and could lead to bleed through and bleaching problems during over-painting.
- Pot life Once mixed, 4-5 mins. at 20ºC with 4% hardener.
- Tools Mixing board, filler knife, plastic or rubber spatula.
- Drying time Sandable after 20 mins. at 20ºC.
- Over-painting ISOPON P40 polyester glass fibre filler can be over-painted with most paint systems
#metrostarhardware #hardwarepenang #hardwareshop #kedaihardware #isoponp40 #isoponwithstarterkit #isoponmalaysia #bodyrepair #automotive #carcare #exterior #shopeemalaysia #fastshipping
Visit us at:
1 x Isopon P40 Body Filler For Holes